Order Products : sales@su-jiao.com
Vinnolit® P 70 F
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Vinnolit GmbH & Co. KG |
| Trademark: | Vinnolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WwNr6N_Vinnolit-P-70-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vinnolit P 70 F is an extremely fine-particle, homopolymer for special plastisols and organosol processing (laquers). Used in combination with solvents or plasticizers and the common additives, organosols or plastisols (see diagram) having low viscosities and good shelf lifes. Coatings made of Vinnolit P 70 F exhibit minimal water absorption, no haze on exposure to water, highest clarity, high gloss and very good electrical and dielectric characteristics. Due to the extreme particle fineness, Vinnolit P 70 F is recommended for very thin coatings, e.g. can and coil coatings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.36 | g/cm³ | ISO 60 |
| K-Value | 70.0 | ISO 1628-2 | |
| Viscosity Number (Reduced Viscosity) | 124.0 | ml/g | ISO 1628 |
| Emulsifier Content | Extremely Low | ||
| Particle Size Distribution 1 | < 0.20 | % | ISO 4610 |
| Volatile Matter | < 0.30 | % | ISO 1269 |
| Note Message | |
|---|---|
| 1 . | retained on 0.063 mm screen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PPR PPHO01 | Premier Plastic Resins, Inc. | PP Homopolymer | PPR |
| Mirakutoran® TPU E665MNAT | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| SCANAMID 66 A12^ X30 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| TAROMID A 280 G5 X0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Adstif HA840R | LyondellBasell Industries | PP, High Crystal | Adstif |
