Order Products : sales@su-jiao.com

Shin-Etsu Elastomer KE-2095-50A/B

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WqAX4F_Shin-Etsu-Elastomer-KE-2095-50A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Shin-Etsu KE-2095-50 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-50 is low enough to allow easy pumping through most injection molding systems. Selective self adhesion Non adhesion to metals Insert-molding and co-injection molding available

Message

Shin-Etsu KE-2095-50 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-50 is low enough to allow easy pumping through most injection molding systems.

Selective self adhesion

Non adhesion to metals

Insert-molding and co-injection molding available

General Information
Features	Low viscosity Workability, good
Agency Ratings	USP Class VI
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit
Specific Gravity	1.11	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	50

Elastomers	Nominal Value	Unit
Tensile Strength	9.80	MPa
Tensile Elongation (Break)	470	%
Tear Strength ¹	29.9	kN/m
Compression Set (180°C, 22 hr)	9.0	%

Thermoset	Nominal Value	Unit
Shelf Life (32°C)	26	wk

Additional Information
Press / Post Cure: Press

Uncured Properties	Nominal Value	Unit
Curing Time	0.17	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P3991	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
Shin-Etsu Elastomer FE-401U	Shin-Etsu Silicones of America	Fluoro Si	Shin-Etsu Elastomer
Moplen S33LS	Shazand (Arak) Petrochemical Corporation	PP Homopolymer	Moplen
UBE Polyethylene V206	UBE America, Inc.	PE, Unspecified	UBE Polyethylene
LNP™ THERMOCOMP™ CF008 compound	SABIC Innovative Plastics	PS (HIPS)	LNP™ THERMOCOMP™