Order Products : sales@su-jiao.com

FM® 10

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	FM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WpPPgx_FM-10.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
FM® 10 is a syntactic epoxy core material which is reinforced with hollow glass micro-balloons. FM 10 syntactic core is designed as a cost and/or weight saving alternative in the manufacture of thin [below 0.20 inches (5.1 mm) thick], stiffness critical composite panels. FM 10 syntactic core is compatible with nearly all commercially available 350°F (177°C) epoxy advanced composites. FM 10 will co-cure with these composites without the use of an adhesive film with. FM 10 is supplied with a non-woven Kevlar® mat (aromatic polyamide fiber) which improves handling characteristics in addition to increasing the material's flexural strength. The product is slightly tacky for ease of handling. The product is supplied in sheet or roll form between two layers of release paper. Suggested Applications: Thin composite panels where weight, cost and/or stiffness are critical

Message

FM® 10 is a syntactic epoxy core material which is reinforced with hollow glass micro-balloons. FM 10 syntactic core is designed as a cost and/or weight saving alternative in the manufacture of thin [below 0.20 inches (5.1 mm) thick], stiffness critical composite panels.

FM 10 syntactic core is compatible with nearly all commercially available 350°F (177°C) epoxy advanced composites. FM 10 will co-cure with these composites without the use of an adhesive film with.

FM 10 is supplied with a non-woven Kevlar® mat (aromatic polyamide fiber) which improves handling characteristics in addition to increasing the material's flexural strength. The product is slightly tacky for ease of handling. The product is supplied in sheet or roll form between two layers of release paper.

Suggested Applications:
Thin composite panels where weight, cost and/or stiffness are critical

General Information
Filler / Reinforcement	Glass Bubble
Features	High Stiffness Low Density
Uses	Reinforced Panels
Appearance	White
Forms	Sheet

Physical	Nominal Value	Unit
Specific Gravity	0.578 to 0.642	g/cm³

Resin Grade	Manufacturer	Category	Trademark
POLYNIL® P50 L	Nilit Plastics	Nylon 66	POLYNIL®
Xuchuan XCS-80P	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
ACRYLITE® LED 8N LD96	Evonik Cyro LLC	Acrylic (PMMA)	ACRYLITE®
Hanwha Total PP HF429	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP Homopolymer	Hanwha Total PP
LubriOne™ PC-30GF/15T	PolyOne Corporation	PC	LubriOne™