Order Products : sales@su-jiao.com
Bormed™ LE6607-PH
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WpHPng_Bormed-LE6607-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed LE6607-PH is a low density polyethylene produced in a high-pressure process. It is intended for blow moulding of soft and flexible packages for pharmaceutical products. The product can also be used for injection moulding and film blowing. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide, gamma radiation, electron beam radiation or steam. Sterilisation steam temperature maximum 110 °C. Applications: Packaging for pharmaceutical products "blow-fill and seal" Ampoules and Bottles |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.927 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.30 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 52 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 300 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 12.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 350 | % | ISO 527-2/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 51.0 | °C | ISO 75-2/B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 165 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT REPROCESSED PC/ABS 830-300R | NEXT Specialty Resins, Inc. | PC+ABS | NEXT REPROCESSED |
| CompaDur® 121 GF 20 FR natural (012) | DimeLika Plast GmbH | PBT | CompaDur® |
| Ingeo™ 3100HP | NatureWorks® LLC | PLA | Ingeo™ |
| POLYfill PP CIP15015 UV | Polykemi AB | PP, Unspecified | POLYfill |
| Sylvin 9848-75FR Grey 9361 | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
