Order Products : sales@su-jiao.com
REPOL® SS80N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | REPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WomfpN_REPOLSS80N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Repol SS80N is recommended for use in Cast Film application, specially designed for use as a core layer in coextruded cast film applications. Repol SS80N is an ideal material for food and general purpose packaging. Grade does not contain slip and antiblock additives. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 36.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 30 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 105 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Type 1, 50mm/min |
| 2 . | Type 1, 50mm/min |
| 3 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® EHM 6007 | Chevron Phillips Chemical Company LLC | HDPE | Marlex® |
| PROTEQ™ C35UST2 | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| VENYL UG301 - 8070 | AD majoris | Nylon 66 | VENYL |
| KEBAPEAK® PEEK XF1730 | BARLOG plastics GmbH | PEEK | KEBAPEAK® |
| PLUSTEK RA304G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
