Order Products : sales@su-jiao.com

NuSil CV3-2289-1

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WnRrLx_NuSil-CV3-2289-1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low Viscosity, Added Micro-baloons for Bond Line Control

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Low Viscosity, Added Micro-baloons for Bond Line Control

General Information
Features	Low to No Outgassing Low Viscosity
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Tack Free Time	12.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	White
Viscosity
-- ¹	14	Pa·s
-- ²	15	Pa·s
Curing Time (23°C)	1.7E+2	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Tensile Strength	1.21	MPa
Tensile Elongation at Break	130	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
ULTEM™ DH1004 resin	SABIC Innovative Plastics	PEI	ULTEM™
BJB Epoxy TC-1607 A/B	BJB Enterprises, Inc.	Epoxy	BJB Epoxy
Halene H B6001L	Haldia Petrochemicals Ltd.	HDPE	Halene H
LAPEROS® GA130	Polyplastics Co., Ltd.	LCP	LAPEROS®
KumhoSunny PBT/ABS HAB8750	Shanghai KumhoSunny Plastics Co., Ltd.	ABS+PBT	KumhoSunny PBT/ABS