Order Products : sales@su-jiao.com
Estaloc® 59300 RETPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estaloc® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Wl1csk_Estaloc-59300-RETPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estaloc® 59300 RETPU is a Polyester-Type Reinforced Engineered Thermoplastic (RETPU). Features: Fast Cycling, Dimensional Stability, Durability, Aesthetics, Low Temperature Impact Uses: Injection Molding |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow 1 | 0.040 | % | ASTM D955 |
| Flow 2 | 0.10 | % | ASTM D955 |
| Transverse flow 3 | 0.10 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 72 - 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (0.762 mm) | 3700 | MPa | ASTM D638 |
| Tensile Strength (0.762 mm) | 83.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 0.762 mm) | 20 | % | ASTM D638 |
| Flexural Modulus (0.762 mm) | 2900 | MPa | ASTM D790 |
| Flexural Strength (0.762 mm) | 90.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 0.762 mm | 130 | J/m | ASTM D256 |
| 23°C, 0.762 mm | 430 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 221 | °C | |
| Front Temperature | 224 | °C | |
| Nozzle Temperature | 232 | °C | |
| Processing (Melt) Temp | 232 | °C | |
| Injection Pressure | 69.0 - 103 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 35.0 - 69.0 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Screw Speed | 30 - 80 | rpm |
| Injection instructions |
|---|
| Air Dew Point: -40°C |
| Note Message | |
|---|---|
| 1 . | Flex Bar |
| 2 . | Disc |
| 3 . | Disc |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vinnolit® E 69 VS | Vinnolit GmbH & Co. KG | PVC Homopolymer | Vinnolit® |
| Akestra™ 110 | Perstorp Holding AB | Copolyester | Akestra™ |
| CONAP® AD-6408 | Cytec Industries Inc. | PUR, Unspecified | CONAP® |
| INLUBE PA66SI2IM | Infinity LTL Engineered Compounds | Nylon 66 | INLUBE |
| POLYFLAM® RPP 1021 | A. Schulman Inc. | PP, Unspecified | POLYFLAM® |
