Order Products : sales@su-jiao.com

SOLPLAST TC 1000A

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	UTEKSOL d.o.o.
Trademark:	SOLPLAST TC
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Wic8tg_SOLPLAST-TC-1000A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles. Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. For coloring masters are used on a polyolefine base (PE, EVA). SERIES 1000 Transparent and half transparent (crep) compound Extended or company realization Suitable for more demanding roles 1000 A Transparent compact

Message

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles.

Resistance to acid, bases and all aqueous solutions is excellent.

Resistance to alcohol and glycols is medium good.

Resistance to aromatic hydrocarbons, fat and of oil is bad.

All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm.

For coloring masters are used on a polyolefine base (PE, EVA).

SERIES 1000

Transparent and half transparent (crep) compound

Extended or company realization

Suitable for more demanding roles

1000 A

Transparent compact

General Information
Features	Acid Resistant Base Resistant
Uses	Footwear
Appearance	Clear/Transparent
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.890 to 0.930	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	52 to 65		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	5.00 to 6.00	MPa	ISO 527-2
Tensile Strain (Break)	850	%	ISO 527-2
Abrasion	140 to 180	mm³

Resin Grade	Manufacturer	Category	Trademark
RTP 200F MS 2	RTP Company	Nylon 12	RTP
RTP 4300 S-1020 Z	RTP Company	PSU+PC	RTP
Nymax™ GF600 A20 HS BK053	PolyOne Corporation	Nylon 6	Nymax™
EverGlide® MB3450	Polymer Dynamix	SAN	EverGlide®
Monprene® RG-19211 NAT XRD1 (PRELIMINARY DATA)	Teknor Apex Company	TPE	Monprene®