Order Products : sales@su-jiao.com
Andur M-80 AS
| Category: | PUR-MDI , Polyurethane (MDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WfFSAG_Andur-M-80-AS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur M-80 AS is a custom formulated MDI based polyurethane elastomer system. It is designed as a low cost, easily processed candidate for use in dunnage applications. M-80 AS is a two component, 0.72:1 ratio (weight) system that can be processed at room temperature and yields an 80 Shore A elastomer. The system needs no post cure and contains no TDI. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life | 2.5 | min | |
| Thermoset Mix Viscosity (21°C) | 770 | cP | ASTM D2393 |
| Demold Time | 15 | min |
| Additional Information |
|---|
| Specific Gravity, ASTM D792, 70°F: 1.22 g/ml |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 43.3 | °C | |
| Mold Temperature | 93.3 - 113 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XT-475 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Sofprene T® 540200A40 | SO.F.TER. SPA | SBS | Sofprene T® |
| THERMOLAST® K TC9TPZ (Series: GP/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ESPOLEX 412A | Sumitomo Chemical America, Inc. | TPO (POE) | ESPOLEX |
| Larpeek 50 K/30 | LATI S.p.A. | PEEK | Larpeek |
