Order Products : sales@su-jiao.com
Bergamid™ B70 red RAL3001
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Bergamid™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WcrUfq_Bergamid-B70-red-RAL3001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bergamid™ B70 red RAL3001 is a Polyamide 6 (Nylon 6) product. It is available in Africa & Middle East, Asia Pacific, or Europe. Primary characteristic: rohs compliant. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.13 | g/cm³ | DIN 53479 |
| K-Value 2 | 74.0 to 78.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1100 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 50.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C) | 22 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 11 | kJ/m² | |
| 23°C | 130 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 170 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Maximum Use Temperature | IEC 60216 | ||
| -- 3 | 75 | °C | |
| Short Time | 175 | °C | |
| Melting Temperature (DSC) | 223 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 60 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 7.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.30 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Note Message | |
|---|---|
| 1 . | ±0.03 g/cm³ |
| 2 . | 96% H2SO4 |
| 3 . | Continuous (GTP 50% Tensile) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AEI SX545:CM540U | AEI Compounds Limited | XLPE | AEI |
| Argothane® ST-3995-80 | Argotec LLC | TPU, Unspecified | Argothane® |
| HiFill® HIPS GF30 | Techmer Engineered Solutions | PS (HIPS) | HiFill® |
| KOPEL® KP3855FB | Kolon Plastics, Inc. | TPEE | KOPEL® |
| PENTAMID A E20 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
