Order Products : sales@su-jiao.com
Safron® H510-02
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WZ4cpz_Safron-H510-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safron® H510-02 Polypropylene Resin is a homopolymer suitable for extrusion, general purpose injection and blow moulding. It offers good processability and low water carry-over, required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 31.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 8.5 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1360 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 6.8 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, not annealed | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 2 | 90.0 | °C | ISO 306/B |
| Additional Information |
|---|
| Blow Molding conditions: Zone 1: 180 to 200°C Zone 2: 210 to 230°C Zone 3: 230 to 250°C Zone 4: 220 to 240°C Die: 220°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 | °C | |
| Middle Temperature | 220 - 230 | °C | |
| Front Temperature | 240 - 250 | °C | |
| Nozzle Temperature | 240 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 245°C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 215 | °C | |
| Cylinder Zone 3 Temp. | 240 | °C | |
| Cylinder Zone 4 Temp. | 250 | °C | |
| Die Temperature | 245 | °C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styropor® BFL 395 | BASF Corporation | PS (EPS) | Styropor® |
| TOTAL Polypropylene PPC 4820WZ | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| Leona™ 1402SH | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| Lucel® N109LD | LG Chem Ltd. | Acetal (POM) Copolymer | Lucel® |
| Durethan® BKV 115 H3.0 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
