Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-40A-BK-1-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WVrdxp_UNISOFT-ADHESION-AD-40A-BK-1-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 - 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.07 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 199 - 210 | °C | |
| Front Temperature | 218 - 229 | °C | |
| Nozzle Temperature | 235 - 246 | °C | |
| Mold Temperature | 40.6 - 65.6 | °C |
| Injection instructions |
|---|
| Molding Temperatures shown are for PC/ABS adhesion. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsamid® AZM 23 Noir T6LD | Arkema | Nylon 12 | Rilsamid® |
| Aegis® MBM | Honeywell | Nylon 6 | Aegis® |
| ASI POLYPROPYLENE 1500X-01 | A. Schulman Inc. | PP Impact Copolymer | ASI POLYPROPYLENE |
| DIOSHY® LP-875 | DIOSHY Co.,Ltd. | SEBS+SBS | DIOSHY® |
| Ebalta AH 110 / TGS | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
