Order Products : sales@su-jiao.com
Acculam™ Epoxyglas G10/FR4
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WTkww9_Acculam-Epoxyglas-G10-FR4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Epoxyglas G10/ FR4, is a laminate sheet comprised of a flame retardant epoxy resin and a woven fiberglass substrate. This grade qualifies to NEMA FR4 and MIL-I-24768/27. This material has high mechanical strength and excellent electrical insulating qualities in both dry and humid conditions. These attributes along with good fabricating characteristics allow this grade to be used in a wide variety of electrical and mechanical applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 345 | MPa | |
| 3.18 mm 2 | > 448 | MPa | |
| Compressive Strength 3 | > 415 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 430 | J/m | |
| -- 5 | > 530 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 140 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| -- 6 | > 50000 | V | |
| A | > 50000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 1.0E+6 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity 7 | 4.80 | IEC 60250 | |
| Dissipation Factor | ASTM D150 | ||
| -- 8 | 0.018 | ||
| -- 9 | 0.017 |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | D48/50 |
| 7 . | D24/23 |
| 8 . | D24/23 |
| 9 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sasol Polymers PE LT079 | Sasol Polymers | LDPE | Sasol Polymers PE |
| Ultramid® B3L | BASF Corporation | Nylon 6 | Ultramid® |
| Hyundai EP PA6 LS175 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
| Innothane® IE-8000 | Innovative Polymers, Inc. | TSU | Innothane® |
| Sylvin 9077-85 Grey 9398 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
