Order Products : sales@su-jiao.com
TPUCO® TPU-C75
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Taiwan PU Corporation |
| Trademark: | TPUCO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WTgM1X_TPUCO-TPU-C75.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPUCO® TPU-C75 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific for calendering. Primary attribute of TPUCO® TPU-C75: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 25.0 | mg |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 55 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 2.94 | MPa | |
| 300% Strain | 3.43 | MPa | |
| Tensile Strength (Break) | 21.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 950 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 5 Temp. | 175 | °C | |
| Adapter Temperature | 180 | °C | |
| Die Temperature | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8200-40 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Alpha PVC GW 2326-A-VW1 NAT LCF | AlphaGary | PVC, Unspecified | Alpha PVC |
| Clariant Nylon 6/6 PA-113C | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Generic ABS+PBT - Glass Fiber | Generic | ABS+PBT | Generic |
| KOPLA PA6 KRE1010 | KOPLA Co., Ltd. | Nylon 6+ABS | KOPLA PA6 |
