Order Products : sales@su-jiao.com
Quadrant EPP PVC, Type I, Grade 1
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WR75XX_Quadrant-EPP-PVC-Type-I-Grade-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP PVC, Type I, Grade 1 is a Polyvinyl Chloride product. It is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.040 | % | |
| Saturation | < 0.040 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 89 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3210 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 57.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 2740 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 57.6 | MPa | ASTM D790 |
| Compressive Modulus | 2410 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 82.7 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Use Temperature - Long Term, Air | 60 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SSG6066 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Trademark PE mLLD1916B | Trademark Plastics Corporation | mLLDPE | Trademark PE |
| Bayfill® EA 2003 (5 pcf) | Covestro - PUR | PUR-Ether/MDI | Bayfill® |
| EVERLON® TS-75 | Ever Polymer Co., Ltd. | SEBS | EVERLON® |
| Favorite REG100 | Favorite Plastics | PE, Unspecified | Favorite |
