Order Products : sales@su-jiao.com

NuSil MED-4917

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WMgSS0_NuSil-MED-4917.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY, LONG POT LIFE

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: LOW VISCOSITY, LONG POT LIFE

General Information
Features	Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.06	g/cm³
Viscosity
-- ¹	9.5	Pa·s
-- ²	14	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life (25°C)	480	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	20
Tensile Strength	3.45	MPa
Tensile Elongation at Break	380	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Udel® P-3700 HC	Solvay Specialty Polymers	PSU	Udel®
GAPEX® HP RPP40EB98HB	Ferro Corporation	PP Homopolymer	GAPEX® HP
KUBE PIR 22300	KUBE Electronics AG	HDPE	KUBE PIR
Karina IVORY PVC COMPOUND -E 853-35/ 1-DY-IS(AS-80)/K	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Infino NH-1033	LOTTE ADVANCED MATERIALS CO., LTD.	PC+ABS	Infino