Order Products : sales@su-jiao.com
Premier LB01018 - BO
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WLXptd_Premier-LB01018---BO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LB01018 is a butene linear low density polyethylene, designed for thin film applications requiring toughness and strength. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intented for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 186 | MPa | |
| TD | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 27.6 | MPa | |
| TD : Break | 20.7 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 650 | % | |
| TD : Break | 850 | % | |
| Dart Drop Impact | 130 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 100 | g | |
| TD | 400 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 17 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoflon® PFR 95 | Solvay Specialty Polymers | Perfluoroelastomer | Tecnoflon® PFR |
| EPLAMID 66 GFT 10 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| HiFill® PEEK GF40 A HF | Techmer Engineered Solutions | PEEK | HiFill® |
| Braskem PE LDI7022 | Braskem IDESA | LDPE | Braskem PE |
| LNP™ LUBRICOMP™ EL003 compound | SABIC Innovative Plastics | PEI | LNP™ LUBRICOMP™ |
