Order Products : sales@su-jiao.com
AIE PC K 30 BN
| Category: | PC , Polycarbonate |
| Manufacturer: | Asia International Enterprise (Hong Kong) Limited |
| Trademark: | AIE PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WK3lXL_AIE-PC-K-30-BN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AIE PC K 30 BN is a polycarbonate (PC) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. The main features of AIE PC K 30 BN are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.50 - 0.80 | % | Internal method |
| Water Absorption (23°C, 24 hr) | 0.40 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 62.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 110 | % | ISO 527-2 |
| Flexural Modulus | 2100 | MPa | ISO 178 |
| Flexural Stress | 93.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 56 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 120 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 116 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.750 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 120 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 280 - 310 | °C | |
| Middle Temperature | 290 - 330 | °C | |
| Front Temperature | 290 - 310 | °C | |
| Nozzle Temperature | 270 - 300 | °C | |
| Mold Temperature | 80.0 - 120 | °C | |
| Injection Pressure | 40.0 - 100 | MPa | |
| Holding Pressure | 40.0 - 50.0 | MPa | |
| Back Pressure | 5.00 - 10.0 | MPa | |
| Screw Speed | 40 - 70 | rpm |
| Injection instructions |
|---|
| Cylinder Temperature 4: 270 to 290°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Raditer® B RVA200 | Radici Plastics | PBT | Raditer® |
| Wondel® A AG5T | Nanjing Julong Engineering Plastics Co., LTD | Nylon 66 | Wondel® A |
| EMPBT® IM | EMAS Plastik San.Tic.AS. | PBT | EMPBT® |
| HAIPLEN H30 G6 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
| XYLEX™ X7507 resin | SABIC Innovative Plastics | PC+Polyester | XYLEX™ |
