Order Products : sales@su-jiao.com
Thermoset Plastics DC-634
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WHTylS_Thermoset-Plastics-DC-634.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics DC-634 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for laminating. Primary attribute of Thermoset Plastics DC-634: Heat Resistant. Typical application of Thermoset Plastics DC-634: Coating Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.27 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 188 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 246 | MPa | ASTM D790 |
| Compressive Strength | 299 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 15 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 5.4 | ||
| Thermoset Mix Viscosity (25°C) | 2300 | cP | ASTM D2393 |
| Demold Time | |||
| 25°C | 960 | min | |
| 121°C | 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radiflam® A RV300 HF 339 NER | Radici Plastics | Nylon 66 | Radiflam® |
| Moplen HP483R | LyondellBasell Industries | PP Homopolymer | Moplen |
| NYLEM® 66 GFR 30 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| HIDEN® P600 | YUHWA Korea Petrochemical Ind. Co., Ltd. | HDPE | HIDEN® |
| LTP ZC-1180 | Chengdu Letian Plastics Co., Ltd | PPS, Linear | LTP |
