Order Products : sales@su-jiao.com
Badamid® LB75 S K
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Bada AG |
| Trademark: | Badamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WHKyBx_Badamid-LB75-S-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Badamid® LB75 S K is a Polyamide 6 (Nylon 6) material. It is available in Europe. Primary attribute of Badamid® LB75 S K: Flame Rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.13 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 9.0 to 10 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.6 to 3.4 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 3200 | 1000 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 85.0 | 45.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C) | 4.0 | 20 | % | ISO 527-2/50 |
| Nominal Tensile Strain at Break (23°C) | 30 | > 50 | % | ISO 527-2/50 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 9.0 | 70 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 120 | -- | kJ/m² | |
| 23°C | No Break | No Break | ||
| Notched Izod Impact Strength | ISO 180/1A | |||
| -30°C | 5.0 | -- | kJ/m² | |
| 23°C | 6.5 kJ/m² | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 180 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) 1 | 220 | -- | °C | ISO 3146 |
| CLTE - Flow | 8.5E-5 | -- | cm/cm/°C | DIN 53752 |
| Maximum Service Temperature | IEC 60216 | |||
| -- 2 | 120 | -- | °C | |
| -- | 180 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 100 | 60 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.30 | 7.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.031 | 0.30 | IEC 60250 | |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.800 mm | HB | -- | ||
| 1.60 mm | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 260 to 290 | °C | |
| Mold Temperature | 40.0 to 90.0 | °C |
| Note Message | |
|---|---|
| 1 . | 10 K/min |
| 2 . | 20000 H |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Butyrate 285A3720010 Clear, Trsp | Eastman Chemical Company | CAB | Tenite™ Butyrate |
| Geon™ Vinyl Rigid Extrusion L4794 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| LUVOCOM® 1800-7519 | Lehmann & Voss & Co. | PET | LUVOCOM® |
| PLEXIGLAS® Sheet UV 100 AR | Evonik Industries AG | Acrylic (PMMA) | PLEXIGLAS® Sheet |
| CYCOLOY™ LG9000 resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
