Order Products : sales@su-jiao.com

Dow Corning® MG 7-9850

Category:	Silicone , Silicone
Manufacturer:	Dow Corning Corporation
Trademark:	Dow Corning®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WGb6XX_DowCorningMG79850.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Two-Part, Fillerless Soft Adhesive Elastomers APPLICATIONS Dow Corning MG 7-9800 Soft Skin Adhesive, Dow Corning MG 7-9850 Soft Skin Adhesive and Dow Corning MG 7-9900 Soft Skin Adhesive are intended for adhesion to skin, including over-the-counter bandages and scar therapies. DESCRIPTION Dow Corning® Soft Skin Adhesives are two-part platinum catalyzed, fillerless, silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. These adhesive elastomers are based on a platinum catalyzed polydimethylsiloxane composition that will cure at a variety of temperatures, from ambient to 140°C, without the formation of by-products. The adhesive elastomer is supplied as a two-component kit that must be thoroughly blended together prior to use.

Message

Two-Part, Fillerless Soft Adhesive Elastomers

APPLICATIONS
Dow Corning MG 7-9800 Soft Skin Adhesive, Dow Corning MG 7-9850 Soft Skin Adhesive and Dow Corning MG 7-9900 Soft Skin Adhesive are intended for adhesion to skin, including over-the-counter bandages and scar therapies.

DESCRIPTION
Dow Corning® Soft Skin Adhesives are two-part platinum catalyzed, fillerless, silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. These adhesive elastomers are based on a platinum catalyzed polydimethylsiloxane composition that will cure at a variety of temperatures, from ambient to 140°C, without the formation of by-products. The adhesive elastomer is supplied as a two-component kit that must be thoroughly blended together prior to use.

General Information
Features	Low viscosity Workability, good
Uses	Medical/nursing supplies Adhesive
Appearance	Clear/transparent

Physical	Nominal Value	Unit
Viscosity
Part A	2.90	Pa·s
Part B	2.90	Pa·s

Additional Information	Nominal Value	Unit
Adhesion - PC film	1.10	N/2.5 cm
Penetration After Cure	135	mm/10
Release - PE film	0.0300	N/2.5 cm

Resin Grade	Manufacturer	Category	Trademark
PRL PC/TP-GP3	Polymer Resources Ltd.	PC+Polyester	PRL
RTV-2 XP-378	Silicones, Inc.	Silicone Rubber, RTV-2	RTV-2
Fiberfil® PP-61/CC/20	Fiberfil® Engineered Plastics Inc.	PP Copolymer	Fiberfil®
Ensinger TECACRYL®	Ensinger Inc.	Acrylic, Unspecified	Ensinger
HM10® LC	Heritage Plastics, Inc.	LLDPE	HM10®