Order Products : sales@su-jiao.com
Hyflon® PFA P125
| Category: | PFA , Perfluoroalkoxy |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Hyflon® PFA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WG2GMG_Hyflon-PFA-P125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, inherent flame resistance, low surface energy, and exceptional dielectric properties. Hyflon® PFA resins have been designed to retain their properties over a wide range of temperatures from cryogenic to 300°C (572°F)* and are the material of choice in applications such as linings in the chemical process industry, specialty cables, semiconductor industry, aerospace, and other challenging industries. Hyflon® PFA P125 is a low melt flow rate perfluoroalkoxy resin designed for enhanced creep resistance, higher long-term pressure resistance, and excellent thermal stability. It is a Type II PFA according to ASTM D 3307. * For rating at 300°C (572°F) contact your Solvay Representative. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 1.5 - 3.0 | g/10 min | ASTM D1238 |
| Density | 2.120 - 2.170 | g/cm³ | ASTM D792 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat of crystallization | 28.0 - 38.0 | J/g | ASTM D4591 |
| Heat of Fusion | 28.0 - 38.0 | J/g | ASTM D4591 |
| Linear expansion coefficient | 1.2E-4 - 2.0E-4 | cm/cm/°C | ASTM D696 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 - 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 500 - 600 | MPa | ASTM D1708 |
| Tensile Strength (Break, 23°C) | > 25.0 | MPa | ASTM D1708 |
| Tensile Elongation (Break, 23°C) | > 300 | % | ASTM D1708 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 310 - 316 | °C | ASTM D4591 |
| Peak Crystallization Temperature (DSC) | 285 - 295 | °C | ASTM D4591 |
| Specific Heat (23°C) | 900 - 1100 | J/kg/°C | ASTM E1269 |
| Thermal Conductivity (40°C) | 0.15 - 0.25 | W/m/K | ASTM C177 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 95 | % | ASTM D2863 |
| Additional Information |
|---|
| PROCESSINGBecause PFA is corrosive in the melt, machinery used to process Hyflon® should be lined with corrosion resistant alloys.HEALTH SAFETY AND ENVIRONMENTHyflon® PFA P125 is a very inert polymer and it is not harmful if used and handled according to standard processing procedures.If handled inappropriately, it may release harmful toxic chemicals. Please refer to the Material Safety Data Sheets for more information on handling and safety.PACKAGING AND STORAGEHyflon® PFA P125 resin is available in 25 kg (55 lbs) and 600 kg (1323 lbs) packaging. Though it has an indefinite shelf life, it is recommended to store it in a clean area, protected from direct sunlight, and possible contamination. |
| Note Message | |
|---|---|
| 1 . | 1.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex WR-9130 | SAMSUNG SDI CO., LTD. | ASA | Starex |
| VITAMIDE® AO16BK8507 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Ad-Tech Polyester NO. 29 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| EnCom PPE-PS 210-04 | EnCom, Inc. | PPE+PS | EnCom |
| Sylvin 8950-90 Grey 9519 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
