Order Products : sales@su-jiao.com

Ebalta GM 960 / Comp. A+B

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Ebalta Kunststoff GmbH
Trademark:	Ebalta
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	W5gVdV_Ebalta-GM-960-Comp-A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
GM 960 is a flexible polyurethane casting compound, which was especially developped for applications requiring absolute clarity and UV-stability (no yellowing, light darkening possible). By adding adequate pigments brillant colours and colour effects can be achieved To avoid curing interferences (condensation-curing silicones) have to be free of evaporation. Processing preferrably in vacuum casting plants. Applications Crystal clear mould Reproduction of models Decorative casting Special effects Prototypes Properties UV-stable max. temperature of applicaton about 80°C colour effects by additon of pigments

Message

GM 960 is a flexible polyurethane casting compound, which was especially developped for applications requiring absolute clarity and UV-stability (no yellowing, light darkening possible). By adding adequate pigments brillant colours and colour effects can be achieved To avoid curing interferences (condensation-curing silicones) have to be free of evaporation.

Processing preferrably in vacuum casting plants.

Applications

Crystal clear mould

Reproduction of models

Decorative casting

Special effects

Prototypes

Properties

UV-stable

max. temperature of applicaton about 80°C

colour effects by additon of pigments

General Information
Features	Good Flexibility Good UV Resistance High Clarity
Uses	Decorative Parts Prototyping
Appearance	Clear/Transparent
Processing Method	Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore A)	47 to 53		ISO 7619

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress	1.50 to 1.90	MPa	ISO 527-2
Tensile Strain (Break)	> 100	%	ISO 527-2

Elastomers	Nominal Value	Unit	Test Method
Tear Strength	4.5 to 4.6	kN/m	ISO 34-1

Thermoset	Nominal Value	Unit
Thermoset Components
Hardener	Mix Ratio by Weight: 100
Resin	Mix Ratio by Weight: 50

Uncured Properties	Nominal Value	Unit
Density (20°C)	1.02 to 1.06	g/cm³
Viscosity (25°C)	0.20 to 0.30	Pa·s
Curing Time (20°C)	16 to 18	hr
Pot Life ¹(20°C)	20 to 30	min

Note Message
1 .	200 g

Resin Grade	Manufacturer	Category	Trademark
PRL NY66-G33-(color)H	Polymer Resources Ltd.	Nylon 66	PRL
4MID® 9A22115 HR	4Plas	Nylon 66	4MID®
ALCOM® PS 500/1 VD120 GF30	ALBIS PLASTIC GmbH	PS (GPPS)	ALCOM® PS
apilon 52c® C 301HV	API SpA	TPU-Polyester	apilon 52c®
GLS Nylon 6 PG39	GLS Polymers Pvt. Ltd.	Nylon 6	GLS Nylon 6