Order Products : sales@su-jiao.com
Braskem PP C765-15NA
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem Europe GmbH |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W2RKfG_Braskem-PP-C765-15NA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Braskem C765-15NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. Braskem C765-15NA Polypropylene Resin has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength which is maintained even at low temperatures. Braskem C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. Applications for Braskem C765-15NA Polypropylene Resin:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 66 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 10 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C, Injection Molded | 6.5 | kJ/m² | |
| 23°C, Injection Molded | 12 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 90.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature 2 | 150 | °C | ISO 306/A |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BMC 840 | Bulk Molding Compounds, Inc. | Vinyl Ester | BMC |
| CERTENE™ HMF-0856 | Muehlstein | HDPE, MMW | CERTENE™ |
| Hax™ HF 28 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| Kemcor HD 2470 | Qenos Pty Ltd | HDPE, HMW | Kemcor |
| POLYFLAM® RIPP 2000 HI | A. Schulman Europe | PP Copolymer | POLYFLAM® |
