Order Products : sales@su-jiao.com
Softflex® 0809
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W0eg4g_Softflex-0809.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 0809 is a Thermoplastic Elastomer (TPE) product. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(235°C/1.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.7 to 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 36 | ||
| Shore A, 10 sec | 31 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel) | 1.18 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 5 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 0.600 | MPa | |
| 100% Strain | 0.876 | MPa | |
| 300% Strain | 1.78 | MPa | |
| Tensile Strength 2(Yield) | 4.54 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 610 | % | ASTM D412 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 20 | % | |
| 70°C, 22 hr | 76 | % | |
| 100°C, 22 hr | 82 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (-30°C) | 137 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Argothane® 17200 | Argotec LLC | TPU, Unspecified | Argothane® |
| Evermore PUR SA-2130M | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| HANWHA LLDPE 3120 | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| Sylvin 8600-75 CLEAR | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Ultramid® B27 HM 01 | BASF Corporation | Nylon 6 | Ultramid® |
