Order Products : sales@su-jiao.com

Pinnacle PP 4208

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VyK6MR_Pinnacle-PP-4208.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 4208 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for general extrusion or injection molding applications. Also contains a long term heat aging additive system. Has superior high and low temperature impact.

The 4208 product provides:

Wet/Dry environment resistance

Superior balance of stiffness and impact strength

Excellent long term heat aging properties

Excellent color and processing stability

Enhanced weld-line strength

Pinnacle's 4208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Additive	Heat Stabilizer
Features	Food Contact Acceptable Good Color Stability Good Heat Aging Resistance Good Processing Stability Heat Stabilized High Impact Resistance Impact Copolymer Low Temperature Impact Resistance Weldable
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	23.5	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	10	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1040	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 530	J/m	ASTM D256
Gardner Impact ⁵(-30°C)	35.2	J	ASTM D5420

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
Sorona® 3030G BK001	DuPont Performance Polymers	PTT	Sorona®
ETILINAS HD5301AA	POLYETHYLENE MALAYSIA SDN BHD	HDPE	ETILINAS
GAPEX® HT RNP33LB01BK	Ferro Corporation	Nylon+PP	GAPEX® HT
Enviramid® N1315STHL BK	Ravago Manufacturing Americas, LLC	Nylon 66	Enviramid®
LNP™ THERMOCOMP™ MX88028 compound	SABIC Innovative Plastics	PP, Unspecified	LNP™ THERMOCOMP™