Order Products : sales@su-jiao.com
STARFLEX® P 7033-1000
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | STARFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vwxuu6_STARFLEX-P-7033-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STARFLEX® P 7033 Elastomer is a soft, injection moldable material with a water white clarity. This material is especially suited for soft rubber-like articles such as grips where read through is very important. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.6 to 2.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 33 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 4.69 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 850 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 to 193 | °C | |
| Front Temperature | 188 to 199 | °C | |
| Nozzle Temperature | 199 to 210 | °C | |
| Mold Temperature | 37.8 to 60.0 | °C | |
| Injection Pressure | 3.45 to 4.83 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.552 to 1.03 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PA66 A305 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 66 | Nanjing Hongrui PA66 |
| DAI-EL™ LT-252 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Eastar™ GN119 | Eastman Chemical Company | PETG | Eastar™ |
| Jackdaw ABS GR14NT6352 | Jackdaw Polymers | ABS | Jackdaw ABS |
| Sylvin 9085-95 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
