Order Products : sales@su-jiao.com
BMC 1454
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | BMC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VsgKbp_BMC-1454.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BMC 1454 is a special low-cost material developed specifically for injection molding circuit breakers. It has considerable flame, arc and track resistance. BMC 1454 is a medium strength material with excellent flexural strength necessary to meet the arc interruption test required for circuit breakers. UL® recognized. This material was formerly known as Glastic® 1454. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.88 to 1.94 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.070 to 0.12 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 40 to 50 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 34.5 to 41.4 | MPa | ASTM D638 |
| Flexural Modulus | 9650 to 11000 | MPa | ASTM D790 |
| Flexural Strength | 75.8 to 89.6 | MPa | ASTM D790 |
| Compressive Strength | 159 to 172 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 240 to 290 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 20 | kV/mm | ASTM D149 |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz 2 | 0.058 | ||
| 60 Hz 3 | 0.027 | ||
| 1 MHz 4 | 0.14 | ||
| 1 MHz 5 | 0.15 | ||
| Arc Resistance | 213 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Track Resistance | 1.0 | day |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 280 to 330 | °C |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| 2 . | Condition D |
| 3 . | Condition A |
| 4 . | Condition A |
| 5 . | Condition D |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Badamid® A70 GF30 TM-Z3 | Bada AG | Nylon 66 | Badamid® |
| Ferro PP LPP20BK79WH | Ferro Corporation | PP, Unspecified | Ferro PP |
| Hifax TRC 228P 2 C12509 | LyondellBasell Industries | PP Copolymer | Hifax |
| Sarlink® TPE ME-2160B (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
| SQUARE® SR8658A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
