Order Products : sales@su-jiao.com
Stirol UPM-0703 E (1s.)
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VsRTaY_Stirol-UPM-0703-E-1s-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPM-0703 E is for manufacturing of sheets and inside details for refrigerators with operating mode of chamber with minimal temperature -18°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 2.5 to 5.0 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.2 | % | |
| Ash Content | > 1.1 | % | |
| Purity 2 | 10.0 | ||
| Rubber Content | 10.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break) | > 35 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 7.4 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±13% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP CESTILENE HD 500R | Quadrant Engineering Plastic Products | HMWPE | Quadrant EPP |
| SCANBLEND FS7 | Polykemi AB | ASA+PC | SCANBLEND |
| Trexprene® A67BW | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| KPOL-HDPE HD K-10.0/948 | KPOL Chem Co. | HDPE, HMW | KPOL-HDPE |
| ALCOM® PA66 910/1.1 CF15 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
