Order Products : sales@su-jiao.com
ICORENE® 1041
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | A. Schulman Europe |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vonmr5_ICORENE1041.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 1041 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.4 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 17.0 | MPa | ASTM D638 |
| Fracture | 20.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 28 | % | ASTM D638 |
| Fracture | 1300 | % | ASTM D638 |
| Flexural Modulus | 490 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1 | Internal method | ||
| -40°C | 190 | J/cm | Internal method |
| -20°C | 180 | J/cm | Internal method |
| 23°C | 140 | J/cm | Internal method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AT0320GN | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| RheTech Thermoplastic Polyolefin FT4900-659UV | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| Arlatex® 1531E | INSA | SBR, Emulsion | Arlatex® |
| KRALASTIC® KU-670 R-2 | Nippon A&L Inc. | ABS | KRALASTIC® |
| AXLENE® 35 | INDELPRO, S.A. de C.V. | PP Homopolymer | AXLENE® |
