Order Products : sales@su-jiao.com
BFI 345
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Blueridge Films Inc. |
| Trademark: | BFI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VolP11_BFI-345.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BFI 345 is a Low Density Polyethylene material. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : Blown Film | 179 | MPa | |
| 1% Secant, TD : Blown Film | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, Blown Film | 27.6 | MPa | |
| TD : Break, Blown Film | 23.4 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, Blown Film | 300 | % | |
| TD : Break, Blown Film | 500 | % | |
| Dart Drop Impact (Blown Film) | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : Blown Film | 360 | g | |
| TD : Blown Film | 200 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 70 | ASTM D2457 | |
| Haze | 5.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® 73-70-70 C-P | Vyncolit N.V. | DAP | Vyncolit® |
| ACCUTECH™ HP0334W30L | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Comco PA 6 oil | Comco-Plastic GmbH | Nylon 6 | Comco |
| KRATON® D3226 DI | Kraton Polymers LLC | SBS | KRATON® |
| KMI PA KM66-01MC | KMI Group, Inc. | Nylon 66 | KMI PA |
