Order Products : sales@su-jiao.com
RTP 3400-G-665
| Category: | LCP , Liquid Crystal Polymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VoNNmN_RTP-3400-G-665.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.97 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.020 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 17200 | MPa | ASTM D638 |
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.80 | % | ASTM D638 |
| Flexural Modulus | 15900 | MPa | ASTM D790 |
| Flexural Strength | 116 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (3.18 mm) | 100 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 224 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 | °C | |
| Drying Time | 8.0 | hr | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 332 to 354 | °C | |
| Middle Temperature | 332 to 354 | °C | |
| Front Temperature | 332 to 354 | °C | |
| Nozzle Temperature | 343 to 379 | °C | |
| Mold Temperature | 65.6 to 121 | °C | |
| Injection Pressure | 103 to 138 | MPa | |
| Clamp Tonnage | 5.5 to 11 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM ABS 1035 | Nizhnekamskneftekhim Inc. | ABS | NEFTEKHIM ABS |
| NuSil R1-3930-11 | NuSil Technology | Silicone | NuSil |
| NuSil MED-2045 | NuSil Technology | Rubber | NuSil |
| NYCOA Polyamide 567 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| EPAMOULD 265D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
