Order Products : sales@su-jiao.com
GATONE™ 5630GF
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Solvay Specialities India Private Limited (SSIPL) |
| Trademark: | GATONE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vnc8FB_GATONE-5630GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GATONE™ 5630GF is a Polyetheretherketone (PEEK) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary attribute of GATONE™ 5630GF: Flame Rated. Typical application of GATONE™ 5630GF: Wire & Cable |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.080 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, Injection Molded) | 10000 | MPa | ASTM D638 |
| Tensile Strength (23°C, Injection Molded) | 160 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 2.5 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 10000 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 260 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 95 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 20.0 | °C | ASTM D648 |
| Continuous Use Temperature | 0.00300 | °C | ASTM D794 |
| Glass Transition Temperature | 2.90 | °C | DSC |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Comparative Tracking Index (CTI) | 150 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 | |
| Oxygen Index | 45 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ E375 | Miracll Chemicals Co., Ltd. | TPU-Polyester | Mirathane™ |
| Sindustris POM GC241 | Sincerity Australia Pty Ltd. | Acetal (POM) Homopolymer | Sindustris POM |
| GLS Nylon 6 PW16 | GLS Polymers Pvt. Ltd. | Nylon 6 | GLS Nylon 6 |
| OMIKRON BM 53 NAT | TECNOPOL | PP Homopolymer | OMIKRON |
| Kepamid® 6130GHA | Korea Engineering Plastics Co., Ltd | PPA | Kepamid® |
