Order Products : sales@su-jiao.com
INNOPOL® PP CS 2-9524
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Inno-Comp Ltd. |
| Trademark: | INNOPOL® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VgynKt_INNOPOL-PP-CS-2-9524.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
INNOPOL® CS 2-9524 is a 20% talc-filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9524 is developed for producing injection moulded automotive components. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.01 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1570 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 17.5 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 5.6 | % | ISO 527-2/50 |
| Nominal Tensile Strain at Break | 44 | % | ISO 527-2 |
| Flexural Modulus 1 | 1600 | MPa | ISO 178 |
| Flexural Stress 2 | 24.6 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 4.5 | kJ/m² | ISO 179/1eA |
| 23°C | 22 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 89.5 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.070 | % | |
| Rear Temperature | 190 - 240 | °C | |
| Middle Temperature | 190 - 240 | °C | |
| Front Temperature | 190 - 240 | °C | |
| Processing (Melt) Temp | 210 - 250 | °C | |
| Mold Temperature | 10.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Hold pressure: 30 to 100 % of actual injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® A AR0G5 | Nanjing Julong Engineering Plastics Co., LTD | Nylon 66 | Wondel® A |
| Fainplast PVC MGS 79 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Petrothene® GA601033 | LyondellBasell Industries | LLDPE | Petrothene® |
| Pinnacle PP 1120 Z | Pinnacle Polymers | PP Homopolymer | Pinnacle PP |
| Plasmer 7055B/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
