Order Products : sales@su-jiao.com

Osterlene® LL01020SA

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VboUXD_OsterleneLL01020SA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

LLO1020 is designed for production of a wide variety of films. Films made from this resin exhibit a combination of good toughness and tear resistance.

Osterlene LLO1020 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

General Information
Additive	Anti-caking agent (3000 ppm) Sliding agent (1200 ppm)
Features	smoothness Anti-caking property Good tear strength Good toughness Compliance of Food Exposure
Uses	Films Food packaging
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.95	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	51	µm
Film Puncture Resistance	18.0	J/cm³	Internal method
secant modulus			ASTM D882
2% secant, MD	181	MPa	ASTM D882
2% secant, TD	235	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	12.5	MPa	ASTM D882
TD : Yield	13.5	MPa	ASTM D882
MD : Fracture	52.0	MPa	ASTM D882
TD : Fracture	44.5	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	730	%	ASTM D882
TD : Fracture	810	%	ASTM D882
Dart Drop Impact	300	g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD	810	g	ASTM D1922
TD	1100	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	108	°C	ASTM D1525
Melting Temperature (DSC)	121	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	30		ASTM D2457
Haze	11	%	ASTM D1003

Resin Grade	Manufacturer	Category	Trademark
NYLEM® 6 GFR 30	EMAS Plastik San.Tic.AS.	Nylon 6	NYLEM®
Flontech® FLON-5112-1	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
Edgetek™ PK-30GF/000 FCR NC	PolyOne Corporation	PEEK	Edgetek™
Hifax BR1149AC	LyondellBasell Industries	TPO (POE)	Hifax
LubriOne™ SF-30GF/15T	PolyOne Corporation	PPS	LubriOne™