Order Products : sales@su-jiao.com
Generic PVC Elastomer
| Category: | PVC Elastomer , Polyvinyl Chloride Elastomer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VatPWT_Generic-PVC-Elastomer.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PVC Elastomer This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.09 - 1.31 | g/cm³ | ASTM D792 |
| 23°C | 1.17 - 1.32 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 35 - 80 | ASTM D2240 | |
| 23°C | 54 - 90 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Fracture, 23°C | 5.71 - 19.7 | MPa | ASTM D638 |
| 23°C | 2.00 - 14.1 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 250 - 400 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 2.81 - 7.65 | MPa | ISO 37 |
| Tensile Strength | |||
| Yield, 23°C | 6.71 - 15.1 | MPa | ASTM D412 |
| Fracture, 23°C | 6.15 - 26.0 | MPa | ISO 37 |
| Tensile Elongation | |||
| Fracture, 23°C | 280 - 440 | % | ASTM D412 |
| Fracture, 23°C | 200 - 460 | % | ISO 37 |
| Compression Set | 23 - 55 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 79.1 - 105 | °C | ASTM D794 |
| Brittleness Temperature | -56.6 - -38.5 | °C | ASTM D746 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (23°C) | 3.34 - 6.21 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.056 - 0.14 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 37.4 - 37.8 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PVC ElastomerThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PA6 900/1 GF15 GB15 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Arnite® TV6 241 SN | DSM Engineering Plastics | PBT | Arnite® |
| Flontech® FT-STST50-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| elitel UE3210 | UNITIKA Plastics Division | TPC-ET | elitel |
| Lighter™ S93 | Equipolymers | PET | Lighter™ |
