Order Products : sales@su-jiao.com
Braskem PE SHE150
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VSkNgT_Braskem-PE-SHE150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SHE150 resin is a High Density Polyethylene, copolymer of butene-1. It has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness. It contains processing aid and antioxidant additives. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Raschel; shading and protecting nets; ropes. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 28.0 | MPa | |
| Break, Compression Molded | 40.0 | MPa | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1280 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 76.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 94 | % | ASTM D6866 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADEKA EP-4520S | Adeka Corporation | Epoxy | ADEKA |
| Ad-Tech Epoxy ESR-212 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Grilamid® LV-23 ESD | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Hifax PPN 8008 103220 | LyondellBasell Industries | PP Copolymer | Hifax |
| Kynar® HSV 900 | Arkema | PVDF | Kynar® |
