Order Products : sales@su-jiao.com
Michiflex E9280A
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | API Polymers, Inc. |
| Trademark: | Michiflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VOLRlr_Michiflex-E9280A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Michiflex E9280A is a thermoplastic vulcanized rubber (TPV) product,. It is available in North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.90 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Additional Information |
|---|
| Drying is recommended. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 216 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 204 | °C | |
| Nozzle Temperature | 204 | °C | |
| Processing (Melt) Temp | 216 | °C | |
| Mold Temperature | 37.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2965T | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Matrixx WP63E40 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| Wanthane® WHT-1485RV | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Forprene® 6NB901D50 | SO.F.TER. SPA | TPV | Forprene® |
| G-PAEK™ 1100ESG | Gharda Chemicals Ltd. | PEK | G-PAEK™ |
