Order Products : sales@su-jiao.com

Osterlene® HD1064

Category:	HDPE , High Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VMuVzi_OsterleneHD1064.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HD1064 has superior stiffness and low warpage.

This resin has exceptional processability which translates into shorter cycle times and energy savings.

Osterlene HD1064 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

General Information
Features	Low warpage Rigidity, high
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.964	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹			ASTM D638
Yield	27.0	MPa	ASTM D638
Fracture	20.0	MPa	ASTM D638
Tensile Elongation ²			ASTM D638
Yield	8.0	%	ASTM D638
Fracture	1300	%	ASTM D638
Flexural Modulus - 1% Secant	128	MPa	ASTM D790

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
TECOLITE KM-727JK	KYOCERA Chemical Corporation	Phenolic	TECOLITE
Arnite® AV2 370 HF	DSM Engineering Plastics	PET	Arnite®
Karina GRAY COLOR CONCENTRATE 18/ 90-RG-GE (CS)	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Lucky Enpla LKAS	Lucky Enpla Co LTD	ABS	Lucky Enpla
ALCOM® PC 740/4 RD1123-05LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC