Order Products : sales@su-jiao.com
NEOPLAST 240 FT EB
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | NEOPLAST |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VHrK4B_NEOPLAST-240-FT-EB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoplast 240 FT EB is a hard, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Moulding, Blow Moulding and Extrusion applications. Key Features: Excellent Ozone resistance, RoHS Compliant, UV Stabilised |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec, 23°C) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 11.8 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 19.6 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 650 | % | ASTM D412 |
| Tear Strength 4 | 63.7 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 55 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | 10 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 168 hr) | -15 | % | ASTM D573 |
| Change in Durometer Hardness in Air (150°C, 168 hr) | 1.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 140 | °C | SAE J2236 |
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BMC T15(GPS) | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| CYCOM® 950 | Cytec Industries Inc. | Epoxy | CYCOM® |
| Hylac® GP74 | Ravago Manufacturing Americas, LLC | ABS | Hylac® |
| INEOS PP 101-XA25 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| Plaslube® POM CO UV BK | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
