Order Products : sales@su-jiao.com
REVOLVE® S-TeQ PA 12
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VGOdVb_REVOLVE-S-TeQ-PA-12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve S-TeQ PA12 is a rotational moulding polyamide 12 (Nylon) with enhanced impact properties. The grade carries the inherent PA12 characteristics such as chemical resistant and low permeation to hydrocarbons. The grade exhibits good stiffness, high temperature resistance and good mouldability. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 31.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 1250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (23°C, 3.00 mm) | 95.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 80.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ABS F5170 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Unichem 6511-02 | Colorite Polymers | PVC, Unspecified | Unichem |
| Alkatuff® 501 | Qenos Pty Ltd | LLDPE | Alkatuff® |
| ESTACARB PC 0820GF V0 | Cossa Polimeri S.r.l. | PC | ESTACARB |
| Durethan® BKV 130 DUS008 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
