Order Products : sales@su-jiao.com
Elastoprene HS5150D NAT
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | Elastoprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VGHeQr_ElastopreneHS5150DNAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastoprene HS5150D is a flexible TPE/TPO hybrid intended for injection molding applications, offering good processibility, easy coloring, good heat resistance, improved flexural fatigue and FDA compliance. Applications: Food containers, food closures, storage containers, general industrial and consumer goods applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D, 10 seconds, extruded | 48 | ASTM D2240 | |
| Shore D, 10 seconds, injection molding | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.45 | MPa | ASTM D412 |
| Tensile Strength (Break) | 15.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Tear Strength | 74.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 52 | % | ASTM D395B |
| 70°C, 22 hr | 71 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 199 | °C | |
| Middle Temperature | 177 - 210 | °C | |
| Front Temperature | 191 - 221 | °C | |
| Nozzle Temperature | 199 - 229 | °C | |
| Processing (Melt) Temp | 199 - 221 | °C | |
| Mold Temperature | 10 - 49 | °C | |
| Injection Pressure | 5.17 - 8.96 | MPa | |
| Injection Rate | Fast | ||
| Screw Speed | 50 - 200 | rpm | |
| Clamp Tonnage | 2.8 - 4.8 | kN/cm² | |
| Cushion | 5.08 - 12.7 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 499 X 133941 | RTP Company | PS (GPPS) | RTP |
| Skyrol® SH37 | SKC Inc. | PET | Skyrol® |
| TangoBlack™ FLX973 | Stratasys | Unspecified | TangoBlack™ |
| HiFill® PBT 2112 | Techmer Engineered Solutions | PBT | HiFill® |
| POCAN® T 7331 000000 | LANXESS GmbH | PBT+PET | POCAN® |
