Order Products : sales@su-jiao.com

Epoxies, Ect. 10-3020 NS

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Epoxies, Etc.
Trademark:	Epoxies, Ect.
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VFVh3u_Epoxies-Ect-10-3020-NS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

20 MINUTE SET NON-SAG EPOXY

These high bond strength adhesives are clear 100% solids, two component, non-sag adhesives with a quick setting time of 5-46 minutes at room temperature. They are excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc...

These adhesives were tested in our laboratory for flame retardancy properties. According to our test results they meet the requirements of UL94HB.

Applications:

These unique adhesives are ideally suited for a wide range of electronic, electrical, industrial, structural, and jewelry applications. These adhesives are also an excellent choice for field repairs. They are offered in the popular TriggerBond® dual barrel cartridge dispensing system and bulk packaging.

Features:

Non-sag consistency

High bond strength

Fast room temperature cure - three speeds to choose from

Water & chemical resistance

Outstanding thermal shock resistance

1:1 mix ratio

Impact resistance

General Information
Features	Bondability Fast Cure Good Adhesion Good Chemical Resistance Good Impact Resistance Good Thermal Shock Resistance High Clarity Low to No Water Absorption Thixotropic
Uses	Adhesives Bonding Electrical Parts Electrical/Electronic Applications Industrial Applications Jewelry
Appearance	Clear/Transparent

Impact	Nominal Value	Unit
Notched Izod Impact	140	J/m

Thermal	Nominal Value	Unit
CLTE - Flow	6.0E-5	cm/cm/°C

Additional Information	Nominal Value	Unit
Handle Time (25°C)	30.0 to 35.0	min
Operating Temperature	-50.0 to 130	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Mix Ratio by Weight (PBW)
Part A	1.0
Part B	1.0
Mix Ratio by Volume (PBV)
Part A	1.0
Part B	1.0
Solids Content	100	%
Density (25°C)	1.15	g/cm³
Curing Time (25°C)	24 to 48	hr
Pot Life (25°C)	1000 to 1500	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore D)	72
Compression Strength	58.6	MPa
Electric Strength	17	kV/mm
Relative Permittivity (1 kHz, 25°C)	4.00
Volume Resistivity (25°C)	2.0E+14	ohms·cm
Dissipation Factor (1 kHz)	0.017

Resin Grade	Manufacturer	Category	Trademark
Ming Dih EPS SB	Ming Dih Group Corporation	PS (EPS)	Ming Dih EPS
Telcar® OBC 4965F	Teknor Apex Company	TPE	Telcar®
ABSCOM® F350	Polymer Compounders Limited	ABS	ABSCOM®
Dryflex® 602500 A01	ELASTO	SEBS	Dryflex®
OMIKRON NR 90 NAT	TECNOPOL	PP Homopolymer	OMIKRON