Amodel® A-1145 HS Datasheet,PPA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
AMODEL A- 1145 HS is a 45% glass fiber reinforced heat stable polyphthalamide (PPA) with high thermal deformation temperature, very high bending modulus and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristics of the resin. -black: A- 1145 HS BK 324 -natural color: A- 1145 HS NT

General Information
Filler / Reinforcement	Glass fiber reinforced material, 45% filler by weight
Additive	heat stabilizer
Features	Good dimensional stability Low hygroscopicity Rigid, good High strength High temperature strength Good creep resistance Good chemical resistance Heat resistance, high
Uses	Power/other tools Valve/valve components Industrial components Industrial application Machine/mechanical parts Metal substitution Connector Parts under the hood of a car Automotive Electronics Application in Automobile Field Shell
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.59	--	g/cm³	ISO 1183/A
Molding Shrinkage				ASTM D955
Flow	0.20	0.10	%	ASTM D955
Transverse flow	0.60	0.10	%	ASTM D955
Water Absorption (24 hr)	0.12	--	%	ASTM D570

Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness (R-Scale)	125	--		ASTM D785

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus
--	17200	17200	MPa	ASTM D638
23°C	16800	--	MPa	ISO 527-2
100°C	11200	--	MPa	ISO 527-2
150°C	8000	--	MPa	ISO 527-2
175°C	5380	--	MPa	ISO 527-2
Tensile Stress
Fracture, 23°C	263	--	MPa	ISO 527-2
Fracture, 100°C	173	--	MPa	ISO 527-2
Fracture, 150°C	84.8	--	MPa	ISO 527-2
Fracture, 175°C	75.8	--	MPa	ISO 527-2
--	259	228	MPa	ASTM D638
Tensile Elongation
Fracture	2.6	2.1	%	ASTM D638
Fracture, 23°C	2.7	--	%	ISO 527-2
Fracture, 100°C	2.5	--	%	ISO 527-2
Fracture, 150°C	7.2	--	%	ISO 527-2
Fracture, 175°C	6.5	--	%	ISO 527-2
Flexural Modulus
--	13800	13800	MPa	ASTM D790
23°C	15900	--	MPa	ISO 178
100°C	13000	--	MPa	ISO 178
150°C	5380	--	MPa	ISO 178
175°C	4900	--	MPa	ISO 178
Flexural Strength
--	363	294	MPa	ASTM D790
23°C	377	--	MPa	ISO 178
100°C	267	--	MPa	ISO 178
150°C	111	--	MPa	ISO 178
175°C	94.5	--	MPa	ISO 178
Compressive Strength (25.4 mm)	194	--	MPa	ASTM D695
Shear Strength	108	91.7	MPa	ASTM D732
Poisson's Ratio	0.41	--		ASTM E132

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	10	--	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	92	--	kJ/m²	ISO 179/1eU
Notched Izod Impact
--	110	100	J/m	ASTM D256
23°C	10	--	kJ/m²	ISO 180/1A
Unnotched Izod Impact
--	1100	--	J/m	ASTM D256
23°C	61	--	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, annealed, 3.20mm	301	--	°C	ASTM D648
1.8 MPa, not annealed	281	--	°C	ISO 75-2/A
1.8 MPa, annealed, 3.20mm	287	--	°C	ASTM D648
Continuous Use Temperature				ASTM D3045
-- ¹	165	--	°C	ASTM D3045
-- ²	185	--	°C	ASTM D3045
Melting Temperature	310	--	°C	ISO 11357-3, ASTM D3418
Linear thermal expansion coefficient				ASTM E831
Flow : 0 to 100°C	1.4E-5	--	cm/cm/°C	ASTM E831
Flow : 100 to 200°C	3.5E-5	--	cm/cm/°C	ASTM E831
Lateral : 0 to 100°C	5.0E-5	--	cm/cm/°C	ASTM E831
Lateral : 100 to 200°C	1.5E-4	--	cm/cm/°C	ASTM E831

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+16	2.0E+15	ohms·cm	ASTM D257
Dielectric Strength (3.20 mm)	23	23	kV/mm	ASTM D149
Dielectric Constant				ASTM D150
60 Hz	4.60	4.90		ASTM D150
1 MHz	4.40	4.50		ASTM D150
Dissipation Factor				ASTM D150
60 Hz	5.0E-3	9.0E-3		ASTM D150
1 MHz	0.016	0.021		ASTM D150
Arc Resistance	145	125	sec	ASTM D495
Comparative Tracking Index (CTI)	550	550	V	UL 746

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating ³(3.20 mm)	HB	--		UL 94

Injection	Dry	Unit
Drying Temperature	120	°C
Drying Time	4.5	hr
Suggested Max Moisture	0.045	%
Rear Temperature	304 - 318	°C
Front Temperature	316 - 329	°C
Processing (Melt) Temp	321 - 343	°C
Mold Temperature	135	°C

Injection instructions
Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Injection instructions

Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Note Message
1 .	20000 hours
2 .	5000 hours
3 .	These flammability ratings do not represent the risk of these materials or any other materials in actual fire situations.

Category:	PPA , Polyphthalamide
Manufacturer:	Solvay Specialty Polymers
Trademark:	Amodel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VFL1b8_Amodel-A-1145-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ RB 135601	PolyOne Corporation	TPO	Maxxam™
POLYPRO® 5014L HPT	YUHWA Korea Petrochemical Ind. Co., Ltd.	PP Homopolymer	POLYPRO®
Tecnoflon® FOR 3390	Solvay Specialty Polymers	Fluorelastomer	Tecnoflon®
SPESIN® KP212V0BLK	Kolon Plastics, Inc.	PBT	SPESIN®
TRIREX® 3025I(01)	Samyang Corporation	PC	TRIREX®