Order Products : sales@su-jiao.com
Generic PC - Glass Bead
| Category: | PC , Polycarbonate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VC8aMM_Generic-PC---Glass-Bead.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PC - Glass Bead This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 - 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.49 - 0.71 | % | ASTM D955 |
| 23°C | 0.54 - 0.96 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2380 - 6210 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 40.0 - 55.5 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 2.9 - 10 | % | ASTM D638 |
| Fracture, 23°C | 2.8 - 22 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2340 - 5520 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 67.4 - 89.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 41 - 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 80 - 1600 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 138 - 143 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 129 - 138 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 9.8E+15 - 1.0E+16 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 299 - 316 | °C | |
| Middle Temperature | 314 - 316 | °C | |
| Front Temperature | 316 - 327 | °C | |
| Processing (Melt) Temp | 302 - 316 | °C | |
| Mold Temperature | 92.8 - 102 | °C | |
| Injection Pressure | 85.9 - 86.8 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PC - Glass BeadThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7600 FL HF | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Adiprene® LF 751D | Chemtura | PUR-Ether/TDI | Adiprene® |
| DURANEX® 7195W | Polyplastics Co., Ltd. | PBT | DURANEX® |
| KEP® KEPA 1130 | Kumho Polychem Co., Ltd. | EPDM | KEP® |
| Hostacom ERC 161N C12616 | LyondellBasell Industries | PP Copolymer | Hostacom |
