Order Products : sales@su-jiao.com

POLYFLON™ M-18

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	DAIKIN AMERICA, INC.
Trademark:	POLYFLON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	V9R9b0_POLYFLONM18.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed. There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application. Features Good properties from the billets same as M-12 and higher apparent density. Suitable for large billet.

Message

POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed.

There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application.

Features
Good properties from the billets same as M-12 and higher apparent density. Suitable for large billet.

General Information
Features	Viscosity, High
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit
Apparent Density	0.45	g/cm³
Average Particle Size	40	µm

Resin Grade	Manufacturer	Category	Trademark
RTP 203 HB	RTP Company	Nylon 66	RTP
RTP 200 TFE 20 EG	RTP Company	Nylon 66	RTP
Tarnoform® 500 AST	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
Hostacom LPX 1775	LyondellBasell Industries	PP Copolymer	Hostacom
SABIC® LLDPE RG50035	Saudi Basic Industries Corporation (SABIC)	LLDPE	SABIC® LLDPE