Order Products : sales@su-jiao.com
Ateva® 1880A
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | Ateva® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V939k9_Ateva-1880A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is commonly used for hot melt coating and adhesive applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (125°C/0.325 kg) | 500 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 18.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 4.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 570 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 31.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 78.0 | °C | ASTM D3418 |
| Ring and Ball Softening Point | 89 | °C | ASTM E28 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | < 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILAC AF3560 | Formosa Plastics Corporation | ABS | TAIRILAC |
| Diablend 4500/V0 | DTR S.r.l. (Develop Thermoplastic Resins) | PC+ABS | Diablend |
| Dryflex® A2 600601 | ELASTO | SEBS | Dryflex® |
| Elastollan® Soft 35 AP | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Sylvin 8200-75 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
