Order Products : sales@su-jiao.com
Hypro® PP-CP 20/2
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypro® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V7BHTd_Hypro-PP-CP-20-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This product is intended for general purpose injection molding applications including automotive and consumer products, large buckets & pails where toughness and cold temperature impact are required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.3 to 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 1(23°C) | 1160 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | > 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 to 216 | °C | |
| Middle Temperature | 193 to 238 | °C | |
| Front Temperature | 204 to 249 | °C | |
| Nozzle Temperature | 193 to 238 | °C | |
| Processing (Melt) Temp | 204 to 249 | °C | |
| Mold Temperature | 21.1 to 48.9 | °C | |
| Injection Pressure | 3.45 to 10.3 | MPa |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4799 X 117571 F | RTP Company | PTT | RTP |
| TOTAL Polyethylene Lumicene® M 6012 EP | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Caltex PP HC43 | GS Caltex | PP, Unspecified | Caltex PP |
| Anjacom® 350-H/GF50 | Almaak International GmbH | Nylon 66 | Anjacom® |
| Devcon Titanium Putty | Devcon | Epoxy | Devcon |
