Order Products : sales@su-jiao.com
Hostacom BG722AC (z)
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V55RcI_Hostacom-BG722AC-z-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This information has been secured during the course of product development. Both the product and its properties are subject to change before final commercialization. "Hostacom" BG722AC medium high melt flow, 1,700 MPa flexural modulus, precolored, mineral-filled polypropylene copolymer is designed with an excellent balance of stiffness, impact resistance and processability. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage 1(3.20 mm) | 1.2 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 22.0 | MPa | |
| Break | 17.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 6.0 | % | |
| Break | 200 | % | |
| Flexural Modulus - 1% Secant 2 | 1700 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 85 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 89.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 100x150x3.2 mm injection molded plaque |
| 2 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® BGF15 BK | Ravago Group | Nylon 6 | Ravamid® |
| Spartech Polycom EP6333 B2B | Spartech Polycom | PP, Unspecified | Spartech |
| NEMCON H PC/ABS DP182 | Ovation Polymers Inc. | PC+ABS | NEMCON H |
| Nordbak Cold Cure Backing | Loctite® | Epoxy | Nordbak |
| Pearlthane® 12C75 | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Pearlthane® |
