Order Products : sales@su-jiao.com
Nordbak Pneu Wear
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Loctite® |
| Trademark: | Nordbak |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V4i0mg_Nordbak-Pneu-Wear.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nordbak Pneu Wear is an Epoxy; Epoxide (Epoxy) product filled with ceramic bead and silicon carbide. It is available in North America. Typical application: Coating Applications. Primary characteristic: wear resistant. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D638 |
| Compressive Strength | 107 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 121 | °C | ASTM D794 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 | ||
| Resin | Mix Ratio by Volume: 4.0 | ||
| Pot Life (25°C) | 45 | min | |
| Demold Time (-18°C) | 360 to 480 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPRAPLAST® UPA 63 | RASCHIG GmbH | Polyester, TS | SUPRAPLAST® |
| Sylvin 8937-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Yanshan PE LD100-AC | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Generic Polyester Alloy - Glass Fiber | Generic | Polyester Alloy | Generic |
| K-Bin Rigid PVC KB-5048 | K-Bin, Inc. | PVC, Rigid | K-Bin Rigid PVC |
